Proudly made in
Kansas, USA

Lavatories

Available in rectangular and custom shapes, Onyx lavatories are made-to-order to meet the needs of your bathroom space.

Lavatories are available in almost any size, shape, and can incorporate any of our bowl styles, and edge styles.

A single bowl or multiple bowls can be located where needed. A backsplash can be integral (4” tall or less) or separate (any height). Faucet hole(s) frequently are for a single hole, 4” centerset, or 8” spread, but can be custom sized or located as you need, including an extra hole for a soap dispenser.

Very complicated shapes may require a Template. To learn about making Templates, click here

Traditional Bowl Styles

Transitional Bowl Styles

Contemporary Bowl Styles

Thickness

1″ Thick
(Rectangular & Custom)

1 1/2″ Thick
(Slabs Only – Limited Bowl Options)

Edge Style

Flat Edge
(Rectangular & Custom)

Ogee Edge
(Custom only)

Bevel Edge
(Custom only)

Double Eased Edge
(Custom only)

1 1/2" Overhang Recommended on All Vanity Cabinets

Most cabinets are 18″ or 21″ deep. For 18″ deep vanity cabinets, we recommend using our 19 1/2″ deep lavatory option, and for 21″ deep vanity cabinets, we recommend our 22 1/2″ deep lavatory option. We also offer lavatories in any custom depth you would prefer. 

Traditional Overlay Doors

Full Overlay Doors

Lavatory Drain Recommendations

We recommend using tapered-thin drains – see comparison below

Comparison

Flat-thick Drain vs. Tapered-thin Drain

Angled-thin Drain

Tapered-thin Drain is flush with the lavatory bowl and tapers down to allow the water to flow

Flat-thick Drain

Flat-thick Drain is flat which causes it to trap
water around the drain

"Common" Custom Designs

Note: max size for angle lavatories is 78″ in one direction and 108″ in the other

Offset Lavatory
Tapered End
Radius Corner
Winged Design with Two ore More Bowls
Banjo Design
135° Angle
Bowed Front
Two or More Bowls
Winged Design with Bowed Center
Winged Design with Beveled Center
135° with Tapered Front
Two or More Bowls
Winged Design
Rounded Banjo
Custom Corner
Double 135° Angle
90° Angle
90° with Corner Span
Inverted 90° Angle