Custom Shaped Lavatories

Below are drawings of some common shaped custom lavatory designs. Custom lavatories can be any length, depth, thickness, or shape and can incorporate any of our bowl styles and edge styles. The possibilities are endless.

Please specify faucet hole spacing when ordering: 4″ is typical for a one-piece faucet set; 8″ is used for three piece sets. We can also do single holes, and even add an extra hole for a soap dispenser if requested.

Very complicated shapes may require a Template. To learn about making Templates, click here.

Custom Shaped Lavatories

Traditional Bowl Styles

Transitional Bowl Styles

Contemporary Bowl Styles

Other Bowl Styles

Edge Styles



Beveled (Chamfer)

5/8″ Thick Flat

1″ Thick Flat

1.5″ Thick Flat

"Common" Custom Designs

Offset Lavatory

Tapered End

Radius Corner

Winged Design with Two or More Bowls

Banjo Design

135° Angle

Bowed Front

Two or More Bowls 

Winged Design with Bowed Center

Winged Design with Beveled Center

135° with Tapered Front

Inverted 135° Angle

Winged Design

Rounded Banjo

Custom Corner

Double 135° Angle

90° Angle

90° with Corner Span

Inverted 90° Angle

Lavatory Drain Recommendations
We recommend using tapered-thin drains – see comparison below


Angled-thin Drain

Flat-thick Drain

Flat-thick Drain vs. Tapered-thin Drain

Tapered-thin Drain is flush with the lavatory bowl and tapers down to allow the water to flow

Flat-thick Drain is flat which causes it to trap water around the drain